Toro DINGO TXL2000 Rubber Tracks & Parts

The Toro TXL2000 runs a 300x86x48 track: 300 mm across the tread, 86 mm between links, 48 links around. Cut for hardscape, landscape and tight-access work and shipped free to the lower 48.

What the numbers mean on a Toro TXL2000

  • 300x86x48 — 300 mm tread width (about 12"), 86 mm pitch, 48 links

Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.

Tread choice for the Toro TXL2000

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • C-Block — concrete, asphalt and hard-packed ground. Longest wear life and the least vibration on hard surfaces

Undercarriage parts for the Toro TXL2000

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

How these wear

Stand-on loaders spend their life on curbs, trailers and hard surfaces, so abrasion is the usual failure mode, not cracking. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Toro undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts
Toro TXL2000 mini track loader

Track sizes

Heavy-Duty Rubber Tracks for TXL2000

  • 300x86x48 Heavy Duty Rubber Track | C-Block
    Toro TXL2000 300x86x48 C-Block
    • Heavy Duty | 300x86x48
    • Maximum Durability
    • Anti-Vibration
    • Cut & Tear Resistant
    $877.50$843.75

    In stock

    Add to quote

Which tread fits Toro TXL2000?

Pick a tread for your jobsite — then buy above.
+ Recommended surface- Not the primary use— Application dependent
PatternBest UseKey TraitsRoadClayGravelMulchMudTurfAction
C-Block C-BlockHeavy-duty durability Built for maximum durability on abrasive jobsites, hard-pack surfaces, demolition debris, and mixed gravel.
  • Maximum Durability
  • Anti-Vibration
  • Cut & Tear Resistant
+++---View

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

Toro DINGO TXL2000 Rubber Tracks & Parts fitment data

Verified-fit rubber tracks and undercarriage parts for the Toro DINGO TXL2000. Confirm size and tread before ordering.

Frequently Asked Questions

What size rubber tracks fit a Toro DINGO TXL2000?
The Toro DINGO TXL2000 can use300 x 86 x 48. rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.