Find Your Track
Select your equipment to find the perfect OEM-fit replacement
Filters
Best Sellers
Premium rubber tracks trusted by contractors
250x72x45 Rubber Track – Directional (10")
Precision-engineered directional tread delivers reliable tracking and extended service life.
- Precision Turning — Reinforced Core
- Extended Life
- OEM-quality fit and finish
250x72x45 Rubber Track – C-Block (10")
Purpose-built for mini excavators — directional lugs maximize digging traction and stability.
- Continuous Steel Cord — Non-Stretch
- Smooth Ride
- 24-month warranty included
Frequently Asked Questions
Common questions about rubber track replacement
What machines use 250x72x45 rubber tracks?
The 250x72x45 track fits 2 verified mini excavators including Bobcat MT100, Bobcat MT85. Use the Track Finder above or contact us to confirm fitment for your specific serial number or configuration.
What tread patterns are available in 250x72x45?
TrackTECH offers 250x72x45 tracks in 3 tread patterns: C-Block for hard surfaces, concrete, demolition, and all-purpose grading. Zig-Zag for mud, snow, and mixed terrain traction. Multi-Bar for turf, landscaping, and low ground disturbance. Select the pattern that matches your primary work surface. Not sure? Call (850) 816-7898 for a recommendation.
Are 250x72x45 rubber tracks heavy duty?
Yes. Every TrackTECH 250x72x45 rubber track is built to heavy-duty OEM spec — tread pattern is a surface choice, not a quality tier. Every unit uses continuous steel cord reinforcement (40% stronger tensile strength than conventional jointed cable), drop-forged steel core links that resist deformation under load, and premium anti-abrasion virgin rubber compound that resists chunking and tearing in demanding conditions. Every track ships with a 24-month warranty.
How long do 250x72x45 rubber tracks last?
Under normal operating conditions, 250x72x45 rubber tracks last 1,500–2,000 hours. Well-maintained machines running on clean, non-abrasive surfaces can reach 3,000–5,000 hours. Abrasive demolition debris, concrete rubble, and sharp pivot turns on hard surfaces are the top causes of early wear. Inspect tracks every 250 hours for cracking, chunking, exposed steel cord, and proper tension.
How do I confirm 250x72x45 is the correct size for my machine?
Check the size stamp molded into the inside of your existing track — it should read 250x72x45 (250mm width, 72mm pitch, 45 links). If the stamp is worn off, measure manually: track width across the full rubber, pitch center-to-center between steel drive links, then count all drive lugs around the inside of the track. Also confirm your guide type matches your undercarriage — running the wrong guide causes derailment and premature wear. Call (850) 816-7898 for free fitment verification.
How are 250x72x45 rubber tracks shipped? Do I need a forklift?
All 250x72x45 rubber tracks ship free via LTL freight, palletized and strapped. Orders placed before 12 PM CT ship same day. Nationwide delivery takes 1–3 business days. Delivery is curbside — the freight driver drops the pallet at the curb or job site entrance. You will need a forklift or pallet jack to move the pallet from there. No liftgate or inside delivery is included unless specifically arranged in advance.
Should I replace both 250x72x45 tracks at the same time?
Yes — always replace 250x72x45 rubber tracks in pairs. Running a new track on one side and a worn track on the other causes uneven traction, makes the machine pull to one side, and puts unequal stress on the drive motors and undercarriage components on both sides. Replacing both tracks at the same time also ensures even wear going forward.
{"type"=>"root", "children"=>[{"type"=>"paragraph", "children"=>[{"type"=>"text", "value"=>"250x72x45 rubber tracks are built for durability, traction, and long-term performance across demanding jobsite conditions. These OEM-fit replacement tracks are designed to help reduce downtime while maintaining smooth operation and dependable traction."}]}, {"type"=>"paragraph", "children"=>[{"type"=>"text", "value"=>"Choose the tread pattern and configuration that best matches your machine, terrain, and application, then use our fitment support if you need help confirming size."}]}]}
Compatible Machines
Fits machines requiring 250x72x45 rubber tracks, including popular models from CAT, Bobcat, Kubota, John Deere, and more.
Why Choose 250x72x45 Rubber Tracks
- OEM-fit track size for compatible machines
- Heavy-duty rubber compound
- Continuous steel cord construction
- Built for daily jobsite performance
Find More Rubber Tracks
Browse by brand or equipment type — or use Track Finder for an exact fit