Replacement rubber tracks for the Volvo EC15XR mini excavator in 230x48x66 — 230 mm wide, 48 mm pitch, 66 links. Built for digging, trenching, backfill and tight-quarters work, with free freight to the lower 48.
What the numbers mean on a Volvo EC15XR
- 230x48x66 — 230 mm tread width (about 9"), 48 mm pitch, 66 links
Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.
Tread choice for the Volvo EC15XR
Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:
- MX — mixed and hard surfaces. A durable general-duty excavator tread
Parts we carry for the Volvo EC15XR
Tracks. Call for anything not shown online — we can usually source it.
How these wear
Excavator undercarriages load one side hard on slew and travel, so link cracking usually shows up before the tread wears out. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.
Same track, other machines
Track size follows undercarriage geometry, not brand, so 230x48x66 shows up on machines from several makers. If you run any of these alongside the Volvo EC15XR, it is the same belt:
- Bobcat 320
- Bobcat 320L
- Bobcat 321
- Bobcat 322D
- Bobcat 322G
- Bobcat 323
- Bobcat 324
- Bobcat E16
- Bobcat E17
- Bobcat E19
Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.
