This is a direct aftermarket replacement rubber track for the Yanmar T175, engineered to the exact 175 specifications. This 175 track with a 320x86x54 pattern provides reliable traction and flotation for Yanmar T175 models.
This 175 track is verified to fit the following compact track loader tracks models:
To maximize the lifespan of your new 175 track, we recommend inspecting your drive sprockets, bottom rollers, and front idlers prior to installation. Operating a new track on worn sprockets can cause premature wear to the steel links and drive lugs.
Tread Pattern Guide
Compare common TrackTECH rubber track tread patterns by traction, ride comfort, surface protection, and jobsite conditions.
Balanced Jobsite Performance
Best for: general construction, dirt, gravel, clay, and mixed jobsite use.
C-Block tracks are a strong all-around option for compact track loaders working across everyday jobsite conditions. They provide dependable traction, a stable ride, and balanced wear life without being overly aggressive on the ground.
Aggressive Traction
Best for: mud, loose soil, slopes, clay, and soft ground.
Zig-Zag tracks use an alternating lug design to improve bite and help the track clean out in loose or wet conditions. This pattern is a strong choice when traction and hillside control matter more than surface protection.
Severe-Duty Terrain
Best for: forestry, mulching, extreme land clearing, and the most severe off-road environments.
Designed for high-horsepower CTLs in dense brush, jagged terrain, and debris-heavy conditions. The most aggressive TrackTECH tread for severe duty — built for durability, puncture resistance, and relentless traction when clearing heavy brush or earth.
Fortified Core Defense: ultra-reinforced center guide deflects stumps, jagged rocks, and sharp forestry debris from the core. Maximum Bite: deep aggressive lugs deliver uncompromising forward drive from deep clay to heavy snowpack.
Trade-off: overkill on sensitive turf or finished pavement — runs rough and will tear up the ground. Ideal surfaces: mulch/brush, deep clay, jagged rock, snow.
Mini Excavator Control
Best for: mini excavators, trenching, grading, utility work, and mixed surfaces.
Directional tracks are commonly used on mini excavators where forward traction, controlled movement, and dependable wear are important. This pattern helps provide predictable movement across dirt, gravel, clay, and general excavation conditions.
Not sure which tread pattern is right for your machine? Send your make, model, serial number, or a photo of your current track size and TrackTECH will help confirm fitment before your order ships.
Common questions about Yanmar T175 rubber tracks
The Yanmar T175 uses 320x86x54 rubber tracks (Width: 320mm, Pitch: 86mm, Links: 54). Always verify the size stamped on your existing track or use the TrackTECH Rubber Track Finder before ordering.
Matching drive sprocket options for the Yanmar T175 include Yanmar T175 Sprocket | Part #ID2711. When installing new rubber tracks, inspect sprockets for hooked, sharp, or uneven teeth because worn sprockets can shorten track life and damage the drive lugs.
Matching front idler options for the Yanmar T175 include Yanmar T175 Front Idler | Part #271005. Front idlers guide the track and help maintain proper tension, so inspect the flange, bearing condition, and wear surface before installing new tracks.
Matching rear idler options for the Yanmar T175 include Yanmar T175 Rear Idler | Part #275574. A worn rear idler can contribute to poor track alignment, derailment, and premature edge wear, especially after new rubber tracks are installed.
The 320x86x54 rubber track size is used across multiple compact machines, including 320x86x54, Mustang 1750RT-2, and Mustang 1750RT. Always confirm by checking the size stamped on your current track and your machine serial number before ordering.
Yes, inspect sprockets, rollers, and idlers before installing new rubber tracks on the Yanmar T175. Worn undercarriage parts can shorten track life, cause poor alignment, and create uneven wear. Shop matching parts from the linked products above or view all undercarriage parts.
Confirm fitment by checking your machine make, model, serial number, and existing track size or OEM part number. For rubber tracks, verify width, pitch, and link count. For undercarriage parts, compare the part number, bolt pattern, tooth count, and machine position. You can also use the TrackTECH Track Finder or call (850) 816-7898 before ordering.
TrackTECH ships rubber tracks and undercarriage parts quickly across the Lower 48. Heavy items typically ship by freight, while smaller undercarriage parts may ship by parcel depending on warehouse availability. Review TrackTECH shipping information or contact us before ordering if you need priority freight options.
Browse by size, tread pattern, or brand
