Heavy-duty 450x86x60 replacement rubber tracks for the CAT 289C Compact Track Loader, built for dependable traction, flotation, stability, and productive ground contact across demanding construction and earthmoving conditions. Repeated pushing, grading, loading, turning, and travel place continuous load through the track and undercarriage.
The 450 mm (18") footprint provides broad ground contact for stable travel and useful flotation on soft or loose surfaces. On hardpack, gravel, clay, dirt, and mixed jobsites, tread geometry becomes the primary application choice for balancing traction, cleanout, ride quality, and wear.
Advanced abrasion-resistant rubber, a continuous steel-cord core, and drop-forged, heat-treated steel links provide the strength required for repeated drive torque, turning, loading, grading, and travel. The heavy-duty build uses approximately 30% more rubber than standard-duty replacements, adding wear material through high-stress areas while reinforced internal construction helps maintain dependable sprocket engagement and resist stretching, cuts, tearing, chunking, and premature abrasion.
Track life depends on the complete undercarriage. Inspect sprockets, rollers, idlers, alignment, and track tension before installation. Worn mating components, debris packing, or incorrect tension can accelerate wear and reduce service life. Set final track tension to the machine manufacturer's service specification after installation.
Nationwide fulfillment is available, backed by a 24-month warranty against manufacturing defects and application support when needed.
Tested. Trusted. Proven.
Heavy-Duty Comes Standard.
ENGINEERED FOR THE JOBSITE
Heavy-duty replacement rubber tracks engineered for compact track loaders, tracked skid steers, mini excavators, mini track loaders, and demanding construction equipment applications.
Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.
Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.
Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.
The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.
Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.
Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.
Tread Pattern Guide
Compare common TrackTECH rubber track tread patterns by traction, ride comfort, surface protection, and jobsite conditions.
Balanced Jobsite Performance
Best for: general construction, dirt, gravel, clay, and mixed jobsite use.
C-Block tracks are a strong all-around option for compact track loaders working across everyday jobsite conditions. They provide dependable traction, a stable ride, and balanced wear life without being overly aggressive on the ground.
Aggressive Traction
Best for: mud, loose soil, slopes, clay, and soft ground.
Zig-Zag tracks use an alternating lug design to improve bite and help the track clean out in loose or wet conditions. This pattern is a strong choice when traction and hillside control matter more than surface protection.
Severe-Duty Terrain
Best for: forestry, mulching, extreme land clearing, and the most severe off-road environments.
Designed for high-horsepower CTLs in dense brush, jagged terrain, and debris-heavy conditions. The most aggressive TrackTECH tread for severe duty — built for durability, puncture resistance, and relentless traction when clearing heavy brush or earth.
Fortified Core Defense: ultra-reinforced center guide deflects stumps, jagged rocks, and sharp forestry debris from the core. Maximum Bite: deep aggressive lugs deliver uncompromising forward drive from deep clay to heavy snowpack.
Trade-off: overkill on sensitive turf or finished pavement — runs rough and will tear up the ground. Ideal surfaces: mulch/brush, deep clay, jagged rock, snow.
Mini Excavator Control
Best for: mini excavators, trenching, grading, utility work, and mixed surfaces.
Directional tracks are commonly used on mini excavators where forward traction, controlled movement, and dependable wear are important. This pattern helps provide predictable movement across dirt, gravel, clay, and general excavation conditions.
Not sure which tread? Use the options on this page, or request a quote.
Fitment, availability, fulfillment, and support for this product
The CAT 289C is matched to 450x86x60 rubber tracks for this application. 100% Precision Fitment. Guaranteed.
Available tread patterns vary by track configuration and jobsite. The options shown for the CAT 289C are selected for applications such as construction, dirt, gravel, mud, snow, landscaping and mixed terrain.
Yes. Inspect rollers, idlers, sprockets and track tension when installing replacement tracks. Worn undercarriage components can contribute to uneven wear, poor tracking and reduced service life.
Browse by size, tread pattern, or brand
