New Holland E30C Rubber Tracks & Parts

Replacement rubber tracks for the New Holland E30C mini excavator in 300x52.5Nx80 — 300 mm wide, 52.5 mm pitch, 80 links. Built for digging, trenching, backfill and tight-quarters work, with free freight to the lower 48.

What the numbers mean on a New Holland E30C

  • 300x52.5Nx80 — 300 mm tread width (about 12"), 52.5 mm pitch, 80 links, narrow guide lugs

Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.

Tread choice for the New Holland E30C

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • Directional — digging, trenching and slope work. The standard excavator tread

New Holland E30C at a glance

  • Operating weight — 6,305 lb

Undercarriage parts for the New Holland E30C

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

How these wear

Excavator undercarriages load one side hard on slew and travel, so link cracking usually shows up before the tread wears out. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so 300x52.5Nx80 shows up on machines from several makers. If you run any of these alongside the New Holland E30C, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More New Holland undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts
New Holland E30C mini excavator

Track sizes

Heavy-Duty Rubber Tracks for E30C

|
  • 300x52.5Nx80 Directional Rubber Track
    New Holland E30C 300x52.5Nx80 300x52.5Nx80
    • Heavy Duty | 300x52.5Nx80
    $942.50$906.25

    In stock

    Add to quote
  • 300x52.5Nx80 Bridgestone Rubber Track | MX
    New Holland E30C 300x52.5Nx80
    • Bridgestone | 300x52.5Nx80
    $1,369.00$1,189.00

    In stock

    Add to quote

Track construction features

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

New Holland E30C Rubber Tracks & Parts fitment data

Machine Performance

Operating Weight6305 lb
Horsepower60 HP

Hydraulics & Lift

Standard Flow27 GPM

Verified-fit rubber tracks and undercarriage parts for the New Holland E30C. Confirm size and tread before ordering.

Frequently Asked Questions

What size rubber tracks fit a New Holland E30C?
The New Holland E30C can use 300x52.5x80 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.