The Ditch Witch JT1200 runs a 230x72x39 track: 230 mm across the tread, 72 mm between links, 39 links around. Cut for bore setups, utility installs and pit-to-pit moves and shipped free to the lower 48.
What the numbers mean on a Ditch Witch JT1200
230x72x39 — 230 mm tread width (about 9"), 72 mm pitch, 39 links
Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.
Tread choice for the Ditch Witch JT1200
Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:
C-Block — concrete, asphalt and hard-packed ground. Longest wear life and the least vibration on hard surfaces
Parts we carry for the Ditch Witch JT1200
Tracks. Call for anything not shown online — we can usually source it.
How these wear
Drills sit still under load and travel short distances, so tracks usually age out from compound fatigue rather than mileage. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.
Same track, other machines
Track size follows undercarriage geometry, not brand, so 230x72x39 shows up on machines from several makers. If you run any of these alongside the Ditch Witch JT1200, it is the same belt:
Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.
{"handle":"ditch-witch-jt1200","image":"","chooser":false,"parts":[{"title":"230x72x39 Heavy Duty Rubber Track | C-Block","url":"\/products\/heavy-duty-230x72x39-c-block","image":"\/\/newrubbertrack.com\/cdn\/shop\/files\/230x72x39-c-block-mini-loader-rubber-track-01-hero.webp?v=1790630695\u0026width=112","group":"tracks","variant_id":"52268019188024","available":true,"qty":2}]}
Verified-fit rubber tracks and undercarriage parts for the Ditch Witch JT1200. Confirm size and tread before ordering.
Frequently Asked Questions
What size rubber tracks fit a Ditch Witch JT1200?
The Ditch Witch JT1200 can use 230x72x39 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.
{"handle":"ditch-witch-jt1200","image":"","chooser":false,"parts":[{"title":"230x72x39 Heavy Duty Rubber Track | C-Block","url":"\/products\/heavy-duty-230x72x39-c-block","image":"\/\/newrubbertrack.com\/cdn\/shop\/files\/230x72x39-c-block-mini-loader-rubber-track-01-hero.webp?v=1790630695\u0026width=112","group":"tracks","variant_id":"52268019188024","available":true,"qty":2}]}
