Case TV450 Rubber Tracks & Parts

The Case TV450 is cataloged in more than one track width — 400 / 450 mm. Pick the width your undercarriage is actually set up for, then choose tread for the ground you work. Free freight to the lower 48 on every track, 24-month warranty.

Which width fits your Case TV450

  • 450x86x55 — 450 mm (18") wide, 86 mm pitch, 55 links
  • 400x86x55 — 400 mm (16") wide, 86 mm pitch, 55 links

These are not interchangeable by preference — the width your machine takes is set by the roller frame and sprocket it left the factory with. Wider tread floats better on soft ground and spreads ground pressure; narrower runs cheaper, turns easier and clears tight spots. Measure the existing track across the tread face before you order.

Tread choice for the Case TV450

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • All-Terrain — everything in between. A compromise tread when the machine moves between surfaces
  • C-Block — concrete, asphalt and hard-packed ground. Longest wear life and the least vibration on hard surfaces
  • Multi-Bar — mud, snow and soft ground. Deep bar lugs bite and shed material instead of packing up
  • X-Terrain — the worst ground you have. Aggressive lugs for mud, slope and loose fill
  • Zig-Zag — general mixed ground. Balanced traction with a smoother ride than a bar tread
  • Staggered Block — mixed dirt and gravel. Block stability with better cleanout than a straight block

If the machine splits its time between surfaces, buy for the ground you are on most — a hard-surface tread on constant mud will spin, and a bar tread on concrete will wear out in half the hours.

Undercarriage parts for the Case TV450

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

Where more than one part number is listed, Case changed that component across serial ranges. Match the number stamped on the part you are replacing, or send us the machine serial and we will pick it.

How these wear

CTLs run high ground speed and counter-rotate all day, which is what eats edge lugs and drive lugs first. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so one of these sizes shows up on machines from several makers. If you run any of these alongside the Case TV450, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Case undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts
Case TV450 compact track loader

Track sizes

Heavy-Duty Rubber Tracks for TV450

|
  • 450x86x55 all terrain heavy-duty rubber track
    Case TV450 450x86x55 All-Terrain
    • Heavy Duty | 450x86x55
    • All-Terrain Grip
    • Smooth Ride
    • Cut Resistant
    $1,664.00$1,599.00

    In stock

    Add to quote
  • 450x86x55 c block heavy-duty rubber track
    Case TV450 450x86x55 C-Block
    • Heavy Duty | 450x86x55
    • Maximum Durability
    • Anti-Vibration
    • Cut & Tear Resistant
    $1,527.50$1,468.75

    In stock

    Add to quote
  • 450x86x55 multi bar heavy-duty rubber track
    Case TV450 450x86x55 Multi-Bar
    • Heavy Duty | 450x86x55
    • Max Pushing Power
    • Deep Mud Grip
    • Self-Cleaning
    $1,456.00$1,400.00

    In stock

    Add to quote
  • 450x86x55 x terrain heavy-duty rubber track
    Case TV450 450x86x55 X-Terrain
    • Heavy Duty | 450x86x55
    • Forestry Bite
    • Core Defense
    • Max Traction
    $1,488.50$1,431.25

    In stock

    Add to quote
  • 450x86x55 zig zag heavy-duty rubber track
    Case TV450 450x86x55 Zig-Zag
    • Heavy Duty | 450x86x55
    • High Traction
    • Self-Cleaning
    • Versatile Performance
    $1,608.85$1,399.00

    In stock

    Add to quote
  • 400x86x55 block heavy-duty rubber track
    Case TV450 400x86x55 Staggered-Block
    • Heavy Duty | 400x86x55
    • Smooth Ride
    • Easy Turning
    • Cut Resistant
    $1,176.50$1,132.00

    In stock

    Add to quote
  • 400x86x55 c block heavy-duty rubber track
    Case TV450 400x86x55 C-Block
    • Heavy Duty | 400x86x55
    • Maximum Durability
    • Anti-Vibration
    • Cut & Tear Resistant
    $1,209.00$1,163.00

    In stock

    Add to quote
  • 400x86x55 multi bar heavy-duty rubber track
    Case TV450 400x86x55 Multi-Bar
    • Heavy Duty | 400x86x55
    • Max Pushing Power
    • Deep Mud Grip
    • Self-Cleaning
    $1,352.00$1,299.00

    In stock

    Add to quote
  • 400x86x55 z max heavy-duty rubber track
    Case TV450 400x86x55 Z-Max
    • Heavy Duty | 400x86x55
    • Extreme Grip
    • Side-Hill Stability
    • Tear Resistant
    $1,267.50$1,219.00

    In stock

    Add to quote
  • Bridgestone 450x86Bx55 Multi-Bar rubber track
    Case TV450 450x86x55 Multi-Bar
    • Bridgestone | 450x86x55
    • Max Pushing Power
    • Deep Mud Grip
    • Self-Cleaning
    $2,206.10$2,122.00

    In stock

    Add to quote
  • Bridgestone 450x86x55 Rubber Track — Bridgestone branded hero
    Case TV450 450x86x55 Staggered-Block
    • Bridgestone | 450x86x55
    • Smooth Ride
    • Easy Turning
    • Cut Resistant
    $2,206.10$2,122.00

    In stock

    Add to quote
  • Bridgestone 450x86Bx55 Vortech rubber track
    Case TV450 450x86x55 Vortech
    • Bridgestone | 450x86x55

    Request quote

  • Bridgestone 450x86Bx55 C-Block rubber track
    Case TV450 450x86x55 C-Block
    • Bridgestone | 450x86x55
    • Maximum Durability
    • Anti-Vibration
    • Cut & Tear Resistant
    $2,206.10$2,122.00

    In stock

    Add to quote

Which tread fits Case TV450?

Pick a tread for your jobsite — then buy above.
+ Recommended surface- Not the primary use Application dependent
PatternBest UseKey TraitsRoadClayGravelMulchMudTurfAction
All-Terrain All-TerrainHard-surface control Precision machine control, easy turning, and extended life on hard surfaces. Preferred by asphalt and concrete contractors working on road and gravel.
  • Precision Machine Control
  • Easy Turning
  • Extended Life
+-+---View
C-Block C-BlockHeavy-duty durability Built for maximum durability on abrasive jobsites, hard-pack surfaces, demolition debris, and mixed gravel.
  • Maximum Durability
  • Anti-Vibration
  • Cut & Tear Resistant
+++---View
Multi-Bar Multi-BarPushing power and mud grip Designed for pushing power, deep mud grip, and clean-out performance when traction matters more than smooth finish.
  • Max Pushing Power
  • Deep Mud Grip
  • Self-Cleaning
-+-+++View
X-Terrain X-TerrainMulching / Land Clearing Forestry, mulching, and extreme land clearing — fortified core defense and maximum bite for severe off-road environments.
  • Forestry Bite
  • Core Defense
  • Max Traction
-++++-View
Zig-Zag Zig-ZagAll-season traction A versatile all-season pattern with high traction, self-cleaning channels, and balanced ride quality.
  • High Traction
  • Self-Cleaning
  • Versatile Performance
++++++View
Staggered Block Staggered BlockSmooth turning A smoother-riding tread option with easier turning and dependable cut resistance on mixed surfaces.
  • Smooth Ride
  • Easy Turning
  • Cut Resistant
+-+--+View
Z-Max Z-MaxExtreme grip Aggressive tread geometry for extreme grip, side-hill stability, and tear resistance in rough conditions.
  • Extreme Grip
  • Side-Hill Stability
  • Tear Resistant
-++-+-View
V VortechMachine-matched track option Available on this machine hub. Review the track option above for current price and availability.
  • Governed Fitment
  • Machine-Matched
  • Current Commerce Data
View

Track construction features

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

Case TV450 Rubber Tracks & Parts fitment data

Verified-fit rubber tracks and undercarriage parts for the Case TV450. Confirm size and tread before ordering.

Frequently Asked Questions

What size rubber tracks fit a Case TV450?
Verified rubber track sizes for the Case TV450 include 400x86bx55, 450x86bx55. Confirm the installed undercarriage configuration, guide type, and link count before ordering when more than one verified size applies.