JCB 8018 tracks and undercarriage, sized 230x48x62 (230 mm wide × 48 mm pitch × 62 links). Made for digging, trenching, backfill and tight-quarters work. Free freight, 24-month warranty.
What the numbers mean on a JCB 8018
- 230x48x62 — 230 mm tread width (about 9"), 48 mm pitch, 62 links
Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.
Tread choice for the JCB 8018
Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:
- MX — mixed and hard surfaces. A durable general-duty excavator tread
JCB 8018 at a glance
- Operating weight — 3,664 lb
- Engine — 19 hp
Parts we carry for the JCB 8018
Tracks. Call for anything not shown online — we can usually source it.
How these wear
Excavator undercarriages load one side hard on slew and travel, so link cracking usually shows up before the tread wears out. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.
Same track, other machines
Track size follows undercarriage geometry, not brand, so 230x48x62 shows up on machines from several makers. If you run any of these alongside the JCB 8018, it is the same belt:
- CAT 301.5
- CAT MM15T
- Case 15
- Case 15MAXI
- Case 16
- Case 16MAXI
- Case 16RTN
- Case 17RTNMAXI
- Case CK16
- Case CX15
Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.
