Takeuchi TB240 Rubber Tracks & Parts

Takeuchi TB240 tracks and undercarriage, sized 350x52.5x86 (350 mm wide × 52.5 mm pitch × 86 links). Made for digging, trenching, backfill and tight-quarters work. Free freight, 24-month warranty.

What the numbers mean on a Takeuchi TB240

  • 350x52.5x86 — 350 mm tread width (about 14"), 52.5 mm pitch, 86 links

Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.

Tread choice for the Takeuchi TB240

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • Directional — digging, trenching and slope work. The standard excavator tread

Takeuchi TB240 at a glance

  • Operating weight — 8,990 lb
  • Engine — 35 hp

Undercarriage parts for the Takeuchi TB240

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

How these wear

Excavator undercarriages load one side hard on slew and travel, so link cracking usually shows up before the tread wears out. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so 350x52.5x86 shows up on machines from several makers. If you run any of these alongside the Takeuchi TB240, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Takeuchi undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts
Takeuchi TB240 mini excavator

Track sizes

Heavy-Duty Rubber Tracks for TB240

|
  • 350x52.5x86 Rubber Track
    Takeuchi TB240 350x52.5x86 350x52.5x86
    • Heavy Duty | 350x52.5x86

    Request quote

    Add to quote
  • 350x52.5x86 Bridgestone Rubber Track | MX
    Takeuchi TB240 350x52.5x86
    • Bridgestone | 350x52.5x86

    Request quote

    Add to quote

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

Takeuchi TB240 Rubber Tracks & Parts fitment data

Machine Performance

Operating Weight8990 lb
Horsepower35 HP

Hydraulics & Lift

Standard Flow30 GPM
High Flow GPM17 GPM

Fitment & Part Numbers

Track Size350x52.5x86
Sprocket0
Idler0
Roller0

Verified-fit rubber tracks and undercarriage parts for the Takeuchi TB240. Confirm size and tread before ordering.

Frequently Asked Questions

What size rubber tracks fit a Takeuchi TB240?
The Takeuchi TB240 can use 350 x 52.5 x 86 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.