Hitachi EX20UR-2 Rubber Tracks & Parts

The Hitachi EX20UR-2 is listed with more than one build of the same 300 mm track. Match link count to what is on the machine now. Free freight to the lower 48, 24-month warranty.

Hitachi EX20UR-2 track options

  • 300x52.5Nx78 — 300 mm (12") wide, 52.5 mm pitch, 78 links, narrow guide lugs
  • 300x52.5x78 — 300 mm (12") wide, 52.5 mm pitch, 78 links
  • 300x52.5x76 — 300 mm (12") wide, 52.5 mm pitch, 76 links

Same tread width on all of them — what changes is pitch and link count, which is set by the sprocket and roller frame. Read the numbers off the inside of the old track rather than going by model year; these were built across more than one undercarriage spec.

Tread choice for the Hitachi EX20UR-2

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • MX — mixed and hard surfaces. A durable general-duty excavator tread
  • Directional — digging, trenching and slope work. The standard excavator tread

If the machine splits its time between surfaces, buy for the ground you are on most — a hard-surface tread on constant mud will spin, and a bar tread on concrete will wear out in half the hours.

Parts we carry for the Hitachi EX20UR-2

Tracks. Call for anything not shown online — we can usually source it.

How these wear

Excavator undercarriages load one side hard on slew and travel, so link cracking usually shows up before the tread wears out. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so one of these sizes shows up on machines from several makers. If you run any of these alongside the Hitachi EX20UR-2, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Hitachi undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts
Hitachi EX20UR-2 mini excavator

Track sizes

Heavy-Duty Rubber Tracks for EX20UR-2

  • 300x52.5Nx78 Directional Rubber Track
    Hitachi EX20UR-2 300x52.5Nx78 300x52.5Nx78
    • Heavy Duty | 300x52.5Nx78
    $923.00$887.50

    In stock

    Add to quote
  • 300x52.5Nx76 Rubber Track
    $903.50$868.75

    In stock

    Add to quote

Track construction features

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

Hitachi EX20UR-2 Rubber Tracks & Parts fitment data

Verified-fit rubber tracks and undercarriage parts for the Hitachi EX20UR-2. Confirm size and tread before ordering.

Frequently Asked Questions

What size rubber tracks fit a Hitachi EX20UR-2?
The Hitachi EX20UR-2 can use 300 x 52.5N x 76, 300 x 52.5N x 78 or 300 x 52.5W x 78 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.