Replacement rubber tracks for the Vermeer SC725TX machine in 230x72Kx45 — 230 mm wide, 72 mm pitch, 45 links. Built for heavy-duty tracked work, with free freight to the lower 48.
What the numbers mean on a Vermeer SC725TX
- 230x72Kx45 — 230 mm tread width (about 9"), 72 mm pitch, 45 links, K-lug guide lugs
Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.
Tread choice for the Vermeer SC725TX
Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:
- MX — mixed and hard surfaces. A durable general-duty excavator tread
Parts we carry for the Vermeer SC725TX
Tracks. Call for anything not shown online — we can usually source it.
How these wear
Match the undercarriage geometry before compound — fit drives service life on specialty builds. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.
Same track, other machines
Track size follows undercarriage geometry, not brand, so 230x72Kx45 shows up on machines from several makers. If you run any of these alongside the Vermeer SC725TX, it is the same belt:
- Bobcat MT100
- Bobcat MT120
- Bobcat MT85
- Case TL100
- Ditch Witch XT850
- New Holland C314
- Vermeer CTX100
- Vermeer CTX160
- Vermeer S725TX
- Vermeer S800TX
Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.
