Bobcat T140 Rubber Tracks & Parts

Replacement rubber tracks for the Bobcat T140 compact track loader in 320x84x46 — 320 mm wide, 84 mm pitch, 46 links. Built for grading, loading, pallet work and land clearing, with free freight to the lower 48.

What the numbers mean on a Bobcat T140

  • 320x84x46 — 320 mm tread width (about 13"), 84 mm pitch, 46 links

Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.

Tread choice for the Bobcat T140

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • Staggered Block — mixed dirt and gravel. Block stability with better cleanout than a straight block
  • C-Block — concrete, asphalt and hard-packed ground. Longest wear life and the least vibration on hard surfaces

If the machine splits its time between surfaces, buy for the ground you are on most — a hard-surface tread on constant mud will spin, and a bar tread on concrete will wear out in half the hours.

Bobcat T140 at a glance

  • Operating weight — 6,424 lb
  • Engine — 46 hp

Undercarriage parts for the Bobcat T140

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

Where more than one part number is listed, Bobcat changed that component across serial ranges. Match the number stamped on the part you are replacing, or send us the machine serial and we will pick it.

How these wear

CTLs run high ground speed and counter-rotate all day, which is what eats edge lugs and drive lugs first. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so 320x84x46 shows up on machines from several makers. If you run any of these alongside the Bobcat T140, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Bobcat undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts
Bobcat T140 compact track loader

Track sizes

Heavy-Duty Rubber Tracks for T140

  • 320x84x46 Heavy Duty Rubber Track | Block
    Bobcat T140 320x84x46 Staggered-Block
    • Heavy Duty | 320x84x46
    • Smooth Ride
    • Easy Turning
    • Cut Resistant

    Request quote

    Add to quote
  • 320x84x46 Heavy Duty Rubber Track | C-Block
    Bobcat T140 320x84x46 C-Block
    • Heavy Duty | 320x84x46
    • Maximum Durability
    • Anti-Vibration
    • Cut & Tear Resistant

    Request quote

    Add to quote

Which tread fits Bobcat T140?

Pick a tread for your jobsite — then buy above.
+ Recommended surface- Not the primary use— Application dependent
PatternBest UseKey TraitsRoadClayGravelMulchMudTurfAction
Staggered Block Staggered BlockSmooth turning A smoother-riding tread option with easier turning and dependable cut resistance on mixed surfaces.
  • Smooth Ride
  • Easy Turning
  • Cut Resistant
+-+--+View
C-Block C-BlockHeavy-duty durability Built for maximum durability on abrasive jobsites, hard-pack surfaces, demolition debris, and mixed gravel.
  • Maximum Durability
  • Anti-Vibration
  • Cut & Tear Resistant
+++---View

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

Bobcat T140 Rubber Tracks & Parts fitment data

Machine Performance

Operating Weight6424 lb
Horsepower46 HP
ROC / Bucket Force1400 lb

Hydraulics & Lift

Standard Flow16 GPM

Fitment & Part Numbers

Track Size320x84x46
Sprocket7
Idler6
Roller6

Verified-fit rubber tracks and undercarriage parts for the Bobcat T140. Confirm size and tread before ordering.

Frequently Asked Questions

What size rubber tracks fit a Bobcat T140?
The Bobcat T140 can use 320x84x46 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.