The Kubota SVL75-2 undercarriage is a wear system, not a list of unrelated parts. Rubber tracks, sprockets, idlers, rollers, tension and alignment all affect each other, which is why a track replacement is the right time to inspect the complete machine.
Need Kubota SVL75-2 undercarriage parts?
Cataloged track configurations: 320x86x52, 380x86x52, 400x86x52
Kubota SVL75-2 undercarriage part numbers
| Component | Current TrackTECH reference | Check |
|---|---|---|
| Drive sprocket | V0511-21110 | Verify installed component / serial configuration. |
| Front idler | FIV0611-22100 | Verify installed component / serial configuration. |
| Rear idler | RRV0511-24103 | Verify installed component / serial configuration. |
| Bottom roller | TRV0511-25104 | Verify installed component / serial configuration. |
Configuration note: The current live SVL75-2 catalog contains multiple track widths. Match the installed width before changing configurations.
When should you replace a sprocket?
Replace based on actual wear and the machine manufacturer's service criteria. Hooked, pointed or uneven teeth can pull on the drive lugs instead of engaging them cleanly. That is especially important when installing new rubber.
When should you replace rollers or idlers?
Look for leakage, bearing play, binding, damaged flanges, flat spots and obvious misalignment. A seized roller or loose idler can create localized wear and contribute to de-tracking.
Do not use new tracks to hide an undercarriage problem
If the old track repeatedly de-tracked, ratcheted, wore one side, or tore drive lugs, diagnose that symptom before installing the replacement. See Why Does My Rubber Track Keep Coming Off? and Rubber Track Ratcheting or Skipping Under Load.
Shop the complete SVL75-2 machine collection
The live Kubota SVL75-2 Tracks & Parts collection is the current source for products, pricing and availability. If the part number on the machine conflicts with the catalog, verify the serial/configuration before shipment.