Hitachi ZX75US-3 Rubber Tracks & Parts

Q: What size rubber tracks fit a Hitachi ZX75US-3?

The Hitachi ZX75US-3 can use 450 x 81N x 76 or 450 x 81N x 78 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.

The Hitachi ZX75US-3 is listed with more than one build of the same 450 mm track. Match link count to what is on the machine now. Free freight to the lower 48, 24-month warranty.

Hitachi ZX75US-3 track options

450x81x78 — 450 mm (18") wide, 81 mm pitch, 78 links
450x81Nx76 — 450 mm (18") wide, 81 mm pitch, 76 links, narrow guide lugs

Same tread width on all of them — what changes is pitch and link count, which is set by the sprocket and roller frame. Read the numbers off the inside of the old track rather than going by model year; these were built across more than one undercarriage spec.

Tread choice for the Hitachi ZX75US-3

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

Directional — digging, trenching and slope work. The standard excavator tread

Undercarriage parts for the Hitachi ZX75US-3

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

Carrier roller — LK327

How these wear

Excavator undercarriages load one side hard on slew and travel, so link cracking usually shows up before the tread wears out. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so one of these sizes shows up on machines from several makers. If you run any of these alongside the Hitachi ZX75US-3, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Hitachi undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts

Track sizes

Heavy-Duty Rubber Tracks for ZX75US-3

Hitachi ZX75US-3 450x81Nx76 450x81Nx76
- Heavy Duty | 450x81Nx76
$2,301.00$2,212.50
In stock

Add to quote
Hitachi ZX75US-3 450x81x78 450x81Nx78
- Heavy Duty | 450x81x78
$2,353.00$2,262.50
In stock

Add to quote
Hitachi ZX75US-3 450x81x76 Staggered-Block
- Heavy Duty | 450x81x76
- Smooth Ride
- Easy Turning
- Cut Resistant
$2,449.00$2,149.00
In stock

Add to quote

Hitachi ZX75US-3 450x81x76 MX
- Bridgestone | 450x81x76
Request quote
Add to quote

Which tread fits Hitachi ZX75US-3?

Pick a tread for your jobsite — then buy above.

+ Recommended surface- Not the primary use— Application dependent

Pattern	Best Use	Key Traits	Road	Clay	Gravel	Mulch	Mud	Turf	Action
Staggered BlockSmooth turning	A smoother-riding tread option with easier turning and dependable cut resistance on mixed surfaces.	Smooth Ride Easy Turning Cut Resistant	+	-	+	-	-	+	View

100% Virgin Rubber
Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.
Continuous Steel Cords
Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.
Drop-Forged Links
Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.
Corrosion Resistant
The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.
Reinforced Sidewalls
Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.
Low-Vibration Tread
Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.