JCB 150T Rubber Tracks & Parts

Replacement rubber tracks for the JCB 150T compact track loader in 320x86x48 — 320 mm wide, 86 mm pitch, 48 links. Built for grading, loading, pallet work and land clearing, with free freight to the lower 48.

What the numbers mean on a JCB 150T

  • 320x86x48 — 320 mm tread width (about 13"), 86 mm pitch, 48 links

Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.

Tread choice for the JCB 150T

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • Staggered Block — mixed dirt and gravel. Block stability with better cleanout than a straight block

Undercarriage parts for the JCB 150T

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

How these wear

CTLs run high ground speed and counter-rotate all day, which is what eats edge lugs and drive lugs first. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so 320x86x48 shows up on machines from several makers. If you run any of these alongside the JCB 150T, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More JCB undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts

Track sizes

Heavy-Duty Rubber Tracks for 150T

  • 320x86Tx48 Heavy Duty Rubber Track | Block
    JCB 150T 320x86x48 Staggered-Block
    • Heavy Duty | 320x86x48
    • Smooth Ride
    • Easy Turning
    • Cut Resistant
    $1,040.00$1,000.00

    In stock

    Add to quote

Which tread fits JCB 150T?

Pick a tread for your jobsite — then buy above.
+ Recommended surface- Not the primary use— Application dependent
PatternBest UseKey TraitsRoadClayGravelMulchMudTurfAction
Staggered Block Staggered BlockSmooth turning A smoother-riding tread option with easier turning and dependable cut resistance on mixed surfaces.
  • Smooth Ride
  • Easy Turning
  • Cut Resistant
+-+--+View

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

JCB 150T Rubber Tracks & Parts fitment data

Fitment & Part Numbers

Track Size320x86x48
IdlerI
RollerI

Verified-fit rubber tracks and undercarriage parts for the JCB 150T. Confirm size and tread before ordering.

Frequently Asked Questions

What size rubber tracks fit a JCB 150T?
The JCB 150T can use 320x86x48 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.