Komatsu PC40 tracks and undercarriage, sized 400x72.5x70 (400 mm wide × 72.5 mm pitch × 70 links). Made for digging, trenching, backfill and tight-quarters work. Free freight, 24-month warranty.
What the numbers mean on a Komatsu PC40
- 400x72.5x70 — 400 mm tread width (about 16"), 72.5 mm pitch, 70 links
Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.
Tread choice for the Komatsu PC40
Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:
- MX — mixed and hard surfaces. A durable general-duty excavator tread
Parts we carry for the Komatsu PC40
Tracks. Call for anything not shown online — we can usually source it.
How these wear
Excavator undercarriages load one side hard on slew and travel, so link cracking usually shows up before the tread wears out. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.
Same track, other machines
Track size follows undercarriage geometry, not brand, so 400x72.5x70 shows up on machines from several makers. If you run any of these alongside the Komatsu PC40, it is the same belt:
- CAT ME40
- CAT ME40R
- CAT ME45
- Case CX40B
- Case CX40BMC
- Case CX40BMR
- IHI 40G-1
- IHI 40GX-2
- IS-40G
- IS-40GX
Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.
