The Morooka MST1500VDL runs a 700x100x98 track: 700 mm across the tread, 100 mm between links, 98 links around. Cut for off-road hauling and soft-ground transport and shipped free to the lower 48.
What the numbers mean on a Morooka MST1500VDL
- 700x100x98 — 700 mm tread width (about 28"), 100 mm pitch, 98 links
Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.
Tread choice for the Morooka MST1500VDL
Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:
- Multi-Bar — mud, snow and soft ground. Deep bar lugs bite and shed material instead of packing up
Parts we carry for the Morooka MST1500VDL
Tracks. Call for anything not shown online — we can usually source it.
How these wear
Carriers run loaded over uneven ground, so link fatigue and guide-lug wear come before tread loss. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.
Same track, other machines
Track size follows undercarriage geometry, not brand, so 700x100x98 shows up on machines from several makers. If you run any of these alongside the Morooka MST1500VDL, it is the same belt:
Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.
