Terex SR-80 Rubber Tracks

Replacement rubber tracks for the Terex SR-80 compact track loader in 457x101.6x51 — 457 mm wide, 101.6 mm pitch, 51 links. Built for grading, loading, pallet work and land clearing, with free freight to the lower 48.

What the numbers mean on a Terex SR-80

  • 457x101.6x51 — 457 mm tread width (about 18"), 101.6 mm pitch, 51 links

Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.

Tread choice for the Terex SR-80

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • Multi-Bar — mud, snow and soft ground. Deep bar lugs bite and shed material instead of packing up

Undercarriage parts for the Terex SR-80

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

How these wear

CTLs run high ground speed and counter-rotate all day, which is what eats edge lugs and drive lugs first. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so 457x101.6x51 shows up on machines from several makers. If you run any of these alongside the Terex SR-80, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Terex undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts
Terex SR-80 compact track loader

Track sizes

Heavy-Duty Rubber Tracks for SR-80

  • 457x101.6x51 Multi Bar Rubber Track
    Terex SR-80 457x101.6x51 Multi-Bar
    • Heavy Duty | 457x101.6x51
    • Max Pushing Power
    • Deep Mud Grip
    • Self-Cleaning
    $2,171.00$2,149.29

    In stock

    Add to quote
  • 457x101.6x51 camso hxd rubber track
    Terex SR-80 457x101.6x51
    • Heavy Duty | 457x101.6x51
    $2,189.00

    In stock

    Add to quote

Which tread fits Terex SR-80?

Pick a tread for your jobsite — then buy above.
+ Recommended surface- Not the primary use— Application dependent
PatternBest UseKey TraitsRoadClayGravelMulchMudTurfAction
Multi-Bar Multi-BarPushing power and mud grip Designed for pushing power, deep mud grip, and clean-out performance when traction matters more than smooth finish.
  • Max Pushing Power
  • Deep Mud Grip
  • Self-Cleaning
-+-+++View

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

Terex SR-80 fitment data

Frequently Asked Questions

Common fitment, shipping, and rubber track replacement questions

What rubber tracks are compatible with the Terex SR-80?
The Terex SR-80 is cataloged with 457x101.6x51 rubber tracks in the current TrackTECH storefront data. The size format is width × pitch × links.
What are the best rubber tracks for the Terex SR-80?
The best rubber track for the Terex SR-80 depends on ground conditions, workload and the balance you want between traction, ride quality and wear life.
Where can I buy new tracks for a Terex SR-80?
TrackTECH offers new heavy-duty replacement tracks for the Terex SR-80 with low direct pricing, free shipping, fast nationwide delivery and 24-month rubber-track warranty protection. Current prices and available tread options are shown on the page.
How much do Terex SR-80 rubber tracks cost?
Price depends on track size, tread pattern and whether you are replacing one track or a pair. Compare the current Terex SR-80 options and live pricing on TrackTECH rather than relying on a generic model estimate.
Should I replace worn tracks on a used Terex SR-80?
If a used Terex SR-80 has worn, cracked or damaged tracks, replacement can improve traction, ride quality, job readiness and how the machine presents at resale. Inspect the undercarriage condition at the same time so new tracks are not being installed over obviously worn components.