Built to push. The 400x86Tx52 Multi-Bar puts continuous transverse bars on the ground for maximum forward drive — the tread you want when you're grading, dozing, and moving material all day.
Repeating full-width bars bite hard on the push and the pull for the straight-line traction heavy grading and dozing demand, while open channels between the bars clear debris so grip stays consistent. This tread turns engine power into ground drive.
A continuous steel-cord core runs the full loop with no splice to stretch or fail. Drop-forged, heat-treated links lock the drive lugs in the sprocket, and a heavy rubber compound resists cutting, chunking, and abrasion. Heavy Duty Comes Standard.
Tracks fit by the complete size and guide, not width alone. This one is built to the full 400x86Tx52 spec. Match your size and guide before ordering, or send us your make and model — Technicians by Trade, we run this equipment and we'll confirm it.
What machines does the 400x86Tx52 fit?
Compact track loaders like the Takeuchi TL130, Gehl CTL65, and Mustang MTL16 — see the full compatibility list on this page, or send your make and model to confirm.
Which tread should I choose?
C-Block for balanced all-around traction and even wear; Z-Max or Zig-Zag for mud and soft ground; Multi-Bar for maximum pushing power; X-Terrain or All-Terrain for aggressive mixed terrain; Block for the smoothest, lowest-vibration ride on hard surfaces.
Is this heavy-duty, and is it warrantied?
Yes — continuous steel-cord core, drop-forged heat-treated links, and a heavy wear compound, built to OEM-equivalent spec and backed by a 24-month warranty.
ENGINEERED FOR THE JOBSITE
Heavy-duty replacement rubber tracks engineered for compact track loaders, tracked skid steers, mini excavators, mini track loaders, and demanding construction equipment applications.
Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.
Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.
Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.
The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.
Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.
Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.
Tread Pattern Guide
Compare common TrackTECH rubber track tread patterns by traction, ride comfort, surface protection, and jobsite conditions.
Balanced Jobsite Performance
Best for: general construction, dirt, gravel, clay, and mixed jobsite use.
C-Block tracks are a strong all-around option for compact track loaders working across everyday jobsite conditions. They provide dependable traction, a stable ride, and balanced wear life without being overly aggressive on the ground.
Aggressive Traction
Best for: mud, loose soil, slopes, clay, and soft ground.
Zig-Zag tracks use an alternating lug design to improve bite and help the track clean out in loose or wet conditions. This pattern is a strong choice when traction and hillside control matter more than surface protection.
Severe-Duty Terrain
Best for: forestry, mulching, extreme land clearing, and the most severe off-road environments.
Designed for high-horsepower CTLs in dense brush, jagged terrain, and debris-heavy conditions. The most aggressive TrackTECH tread for severe duty — built for durability, puncture resistance, and relentless traction when clearing heavy brush or earth.
Fortified Core Defense: ultra-reinforced center guide deflects stumps, jagged rocks, and sharp forestry debris from the core. Maximum Bite: deep aggressive lugs deliver uncompromising forward drive from deep clay to heavy snowpack.
Trade-off: overkill on sensitive turf or finished pavement — runs rough and will tear up the ground. Ideal surfaces: mulch/brush, deep clay, jagged rock, snow.
Mini Excavator Control
Best for: mini excavators, trenching, grading, utility work, and mixed surfaces.
Directional tracks are commonly used on mini excavators where forward traction, controlled movement, and dependable wear are important. This pattern helps provide predictable movement across dirt, gravel, clay, and general excavation conditions.
Not sure which tread? Use the options on this page, or request a quote.
Fitment, availability, fulfillment, and support for this product
This listing is associated with track size 400x86Tx52. 100% Precision Fitment. Guaranteed. Request a quote if you need help before ordering. This page does not use years or serials.
The product data currently lists these tread options: Multi-Bar. Choose the exact variant shown on this page for current price and availability.
Fulfillment timing depends on the exact item, current inventory, destination, and freight path. TrackTECH confirms the current ship-from and delivery or pickup option for the requested item rather than estimating from the product title or page location.
Eligible TrackTECH rubber tracks include 24-month warranty coverage. Coverage is subject to the published warranty eligibility, installation, use, and claim terms for the product ordered.
Yes. Sprockets, rollers, idlers, track tension, and the rubber track work as a system. Inspect the complete undercarriage before installation and replace worn components when needed.
Browse by size, tread pattern, or brand
