Kobelco SK30SR-6E Rubber Tracks & Parts

The Kobelco SK30SR-6E is listed with more than one build of the same 300 mm track. Match link count to what is on the machine now. Free freight to the lower 48, 24-month warranty.

Kobelco SK30SR-6E track options

  • 300x52.5Kx88 — 300 mm (12") wide, 52.5 mm pitch, 88 links, K-lug guide lugs
  • 300x52.5Wx82 — 300 mm (12") wide, 52.5 mm pitch, 82 links, wide guide lugs

Same tread width on all of them — what changes is pitch and link count, which is set by the sprocket and roller frame. Read the numbers off the inside of the old track rather than going by model year; these were built across more than one undercarriage spec.

Tread choice for the Kobelco SK30SR-6E

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • Directional — digging, trenching and slope work. The standard excavator tread
  • Staggered Block — mixed dirt and gravel. Block stability with better cleanout than a straight block

If the machine splits its time between surfaces, buy for the ground you are on most — a hard-surface tread on constant mud will spin, and a bar tread on concrete will wear out in half the hours.

Undercarriage parts for the Kobelco SK30SR-6E

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

How these wear

Excavator undercarriages load one side hard on slew and travel, so link cracking usually shows up before the tread wears out. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so one of these sizes shows up on machines from several makers. If you run any of these alongside the Kobelco SK30SR-6E, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Kobelco undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts
Kobelco SK30SR-6E mini excavator

Track sizes

Heavy-Duty Rubber Tracks for SK30SR-6E

  • 300x52.5Kx88 Directional Rubber Track

    Request quote

  • 300x52.5Wx82 Block Rubber Track
    Kobelco SK30SR-6E 300x52.5Wx82 Staggered-Block
    • Heavy Duty | 300x52.5Wx82
    • Smooth Ride
    • Easy Turning
    • Cut Resistant
    $968.50$931.25

    In stock

    Add to quote

Which tread fits Kobelco SK30SR-6E?

Pick a tread for your jobsite — then buy above.
+ Recommended surface- Not the primary use— Application dependent
PatternBest UseKey TraitsRoadClayGravelMulchMudTurfAction
Staggered Block Staggered BlockSmooth turning A smoother-riding tread option with easier turning and dependable cut resistance on mixed surfaces.
  • Smooth Ride
  • Easy Turning
  • Cut Resistant
+-+--+View

Track construction features

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

Kobelco SK30SR-6E Rubber Tracks & Parts fitment data

Verified-fit rubber tracks and undercarriage parts for the Kobelco SK30SR-6E. Confirm size and tread before ordering.

Frequently Asked Questions

What size rubber tracks fit a Kobelco SK30SR-6E?
The Kobelco SK30SR-6E can use 300 x 52.5K x 88 or 300 x 52.5W x 82 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.