Shop replacement rubber tracks for the Komatsu CK30-1 using TrackTECH's merchant-confirmed fitment catalog. Confirmed track size options are 400x86Bx56, 450x86Bx56. Match the marking on the existing track before installation, especially when a machine has more than one approved undercarriage configuration.
Rubber track sizing follows width × pitch × links, with guide notation retained where the application requires it. Every dimension must match; a track that is close in width or link count is not a substitute for the correct configuration.
Use the tread choices currently shown on this product to match the jobsite. Closed block patterns favor stable contact and abrasion resistance, while more open patterns improve cleanout in mud and loose material. For mixed surfaces, balance traction, ride quality, and expected wear rather than choosing by appearance alone.
Inspect sprockets, rollers, idlers, alignment, and track tension before installing new tracks. Worn drive components or incorrect tension can shorten replacement-track life. Set final tension to the machine manufacturer's service specification after installation.
TrackTECH provides fitment support before shipment and backs replacement rubber tracks with a 24-month warranty against manufacturing defects. If the track marking or machine configuration does not match the confirmed size list above, verify fitment before ordering.
ENGINEERED FOR THE JOBSITE
Heavy-duty replacement rubber tracks engineered for compact track loaders, tracked skid steers, mini excavators, mini track loaders, and demanding construction equipment applications.
Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.
Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.
Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.
The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.
Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.
Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.
Tread Pattern Guide
Compare common TrackTECH rubber track tread patterns by traction, ride comfort, surface protection, and jobsite conditions.
Balanced Jobsite Performance
Best for: general construction, dirt, gravel, clay, and mixed jobsite use.
C-Block tracks are a strong all-around option for compact track loaders working across everyday jobsite conditions. They provide dependable traction, a stable ride, and balanced wear life without being overly aggressive on the ground.
Aggressive Traction
Best for: mud, loose soil, slopes, clay, and soft ground.
Zig-Zag tracks use an alternating lug design to improve bite and help the track clean out in loose or wet conditions. This pattern is a strong choice when traction and hillside control matter more than surface protection.
Severe-Duty Terrain
Best for: forestry, mulching, extreme land clearing, and the most severe off-road environments.
Designed for high-horsepower CTLs in dense brush, jagged terrain, and debris-heavy conditions. The most aggressive TrackTECH tread for severe duty — built for durability, puncture resistance, and relentless traction when clearing heavy brush or earth.
Fortified Core Defense: ultra-reinforced center guide deflects stumps, jagged rocks, and sharp forestry debris from the core. Maximum Bite: deep aggressive lugs deliver uncompromising forward drive from deep clay to heavy snowpack.
Trade-off: overkill on sensitive turf or finished pavement — runs rough and will tear up the ground. Ideal surfaces: mulch/brush, deep clay, jagged rock, snow.
Mini Excavator Control
Best for: mini excavators, trenching, grading, utility work, and mixed surfaces.
Directional tracks are commonly used on mini excavators where forward traction, controlled movement, and dependable wear are important. This pattern helps provide predictable movement across dirt, gravel, clay, and general excavation conditions.
Not sure which tread? Use the options on this page, or request a quote.
Fitment, availability, fulfillment, and support for this product
The Komatsu CK30-1 is cataloged with multiple track configurations: 450x86x56, 400x86x56.
The best Komatsu CK30-1 track depends on terrain and application. Current tread choices include All-Terrain — mixed surfaces, dirt, hard surfaces, mud, snow, turf and general construction; Block — general construction, dirt, hard surfaces, mud, rip rap and mixed jobsites; C-Block — general dirt, gravel, clay, hard-packed ground and mixed-use construction; Multi-Bar — turf, asphalt, landscaping, paved snow removal and finished surfaces. Compare traction, ride quality, cleanout, ground disturbance and wear for the work you do most.
TrackTECH offers new heavy-duty replacement tracks for the Komatsu CK30-1 with low direct pricing, free shipping, fast nationwide delivery and 24-month rubber-track warranty protection. Current prices and available tread options are shown on the page.
Price depends on track size, tread pattern and whether you are replacing one track or a pair. Compare the current Komatsu CK30-1 options and live pricing on TrackTECH rather than relying on a generic model estimate.
If a used Komatsu CK30-1 has worn, cracked or damaged tracks, replacement can improve traction, ride quality, job readiness and how the machine presents at resale. Inspect the undercarriage condition at the same time so new tracks are not being installed over obviously worn components.
Yes. The current TrackTECH machine record lists these available part families for the Komatsu CK30-1: Tracks, Rollers. Availability and pricing are shown with the corresponding products.
Browse by size, tread pattern, or brand
