Takeuchi TB125 Rubber Tracks & Parts

Q: What size rubber tracks fit a Takeuchi TB125?

The Takeuchi TB125 can use 300 x 52.5W x 78 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.

Replacement rubber tracks for the Takeuchi TB125 mini excavator in 300x52.5x78 — 300 mm wide, 52.5 mm pitch, 78 links. Built for digging, trenching, backfill and tight-quarters work, with free freight to the lower 48.

What the numbers mean on a Takeuchi TB125

300x52.5x78 — 300 mm tread width (about 12"), 52.5 mm pitch, 78 links

Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.

Tread choice for the Takeuchi TB125

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

Directional — digging, trenching and slope work. The standard excavator tread

Takeuchi TB125 at a glance

Operating weight — 6,165 lb
Engine — 22 hp

Undercarriage parts for the Takeuchi TB125

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

Drive sprocket — 04316-10100
Front idler — 03714-00000
Bottom roller — 04313-11100
Carrier roller — 03712-00100

How these wear

Excavator undercarriages load one side hard on slew and travel, so link cracking usually shows up before the tread wears out. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so 300x52.5x78 shows up on machines from several makers. If you run any of these alongside the Takeuchi TB125, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Takeuchi undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts

Track sizes

Heavy-Duty Rubber Tracks for TB125

Takeuchi TB125 300x52.5x78 300x52.5Wx78
- Heavy Duty | 300x52.5x78
$929.50$893.75
In stock

Add to quote
Takeuchi TB125 300x52.5Nx78 300x52.5Nx78
- Heavy Duty | 300x52.5Nx78
$923.00$887.50
In stock

Add to quote

Takeuchi TB125 300x52.5x78
- Bridgestone | 300x52.5x78
$1,349.00$1,169.00
In stock

Add to quote

100% Virgin Rubber
Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.
Continuous Steel Cords
Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.
Drop-Forged Links
Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.
Corrosion Resistant
The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.
Reinforced Sidewalls
Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.
Low-Vibration Tread
Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.