Takeuchi TB250 Rubber Tracks & Parts

Q: What size rubber tracks fit a Takeuchi TB250?

The Takeuchi TB250 can use 400 x 72.5N x 74 or 400 x 72.5W x 74 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.

The Takeuchi TB250 is listed with more than one build of the same 400 mm track. Match link count to what is on the machine now. Free freight to the lower 48, 24-month warranty.

Takeuchi TB250 track options

400x72.5Nx74 — 400 mm (16") wide, 72.5 mm pitch, 74 links, narrow guide lugs
400x72.5Wx74 — 400 mm (16") wide, 72.5 mm pitch, 74 links, wide guide lugs

Same tread width on all of them — what changes is pitch and link count, which is set by the sprocket and roller frame. Read the numbers off the inside of the old track rather than going by model year; these were built across more than one undercarriage spec.

Tread choice for the Takeuchi TB250

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

All-Terrain — everything in between. A compromise tread when the machine moves between surfaces
MX — mixed and hard surfaces. A durable general-duty excavator tread

If the machine splits its time between surfaces, buy for the ground you are on most — a hard-surface tread on constant mud will spin, and a bar tread on concrete will wear out in half the hours.

Takeuchi TB250 at a glance

Operating weight — 10,780 lb
Engine — 38 hp

Undercarriage parts for the Takeuchi TB250

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

Drive sprocket — 02616-03100
Front idler — 04614-90010
Bottom roller — 03913-02100
Carrier roller — 03912-00100

How these wear

Excavator undercarriages load one side hard on slew and travel, so link cracking usually shows up before the tread wears out. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so one of these sizes shows up on machines from several makers. If you run any of these alongside the Takeuchi TB250, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Takeuchi undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts

Track sizes

Heavy-Duty Rubber Tracks for TB250

Takeuchi TB250 400x72.5Nx74 400x72.5Nx74
- Heavy Duty | 400x72.5Nx74
$1,696.50$1,631.25
In stock

Add to quote
Takeuchi TB250 400x72.5Wx74 400x72.5Wx74
- Heavy Duty | 400x72.5Wx74
$1,755.00$1,687.50
In stock

Add to quote

Takeuchi TB250 400x72.5Wx74
- Bridgestone | 400x72.5Wx74
$2,429.00$2,109.00
In stock

Add to quote
Takeuchi TB250 400x72.5Nx74
- Bridgestone | 400x72.5Nx74
$2,429.00$2,109.00
In stock

Add to quote

100% Virgin Rubber
Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.
Continuous Steel Cords
Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.
Drop-Forged Links
Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.
Corrosion Resistant
The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.
Reinforced Sidewalls
Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.
Low-Vibration Tread
Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.