Kubota SVL95-2 Track Size Guide
The SVL95-2 is Kubota's large-frame CTL — 96 hp with vertical lift geometry. It uses the 450x86x58 track, the same as the SVL75-2 and SVL97-2. This is one of the most common track sizes in the industry, shared across Kubota, John Deere, Bobcat, Gehl, Wacker Neuson, and Mustang models.
What size rubber track does the Kubota SVL95-2 use?
The Kubota SVL95-2 uses a 450x86x58 rubber track with a Block (B) guide. This machine produces 96 hp at an operating weight of 10,714 lbs with vertical lift geometry.
Other machines sharing this track size include: Kubota SVL75-2, SVL97-2, John Deere 331G, 333G, Bobcat T870 (suspension) (SVL75-2, 333G, T870).
Can I use a different track size on the Kubota SVL95-2?
No — the SVL95-2 uses only the 450x86x58 size.
What is the best tread pattern for the Kubota SVL95-2?
C-Block for construction. Zig-Zag for all-season and mixed terrain. Straight Bar for landscaping and snow. X-Terrain available for off-road work.
Compare all patterns in our tread pattern guide.
How long do Kubota SVL95-2 rubber tracks last?
1,200 to 1,800 hours under normal conditions.
Maximize track life with proper tension (1–1.5" sag), daily undercarriage cleaning, and matching your tread pattern to your primary work surface. See our maintenance guide for the full checklist.
What undercarriage parts should I replace with new tracks?
Inspect sprockets, front idlers, rear idlers, and bottom rollers at every track swap. Replace sprockets every other track change (~3,000–4,000 hours). Worn undercarriage components destroy new tracks prematurely.
How much do Kubota SVL95-2 replacement tracks cost?
Aftermarket OEM-spec tracks from TrackTECH cost significantly less than dealer OEM pricing while matching factory quality specs — continuous steel cord, anti-abrasion virgin rubber, and drop-forged steel guides. All tracks include free shipping and a 24-month warranty. See our OEM vs aftermarket comparison for details.
Shop 450x86x58 tracks for the Kubota SVL95-2, or find your machine in the Track Finder. Call (850) 816-7898 for fitment questions or to request fleet pricing.
Frequently Asked Questions
What size rubber track does the Kubota SVL95-2 use?
The Kubota SVL95-2 uses a 450x86x58 rubber track with a Block (B) guide. Always verify the size stamp on your existing track before ordering.
What is the best tread pattern for the Kubota SVL95-2?
C-Block for construction. Zig-Zag for all-season and mixed terrain. Straight Bar for landscaping and snow. X-Terrain available for off-road work.
How long do Kubota SVL95-2 rubber tracks last?
1,200 to 1,800 hours under normal conditions.
How often should I replace sprockets on the Kubota SVL95-2?
Replace sprockets every other track change — roughly every 3,000 to 4,000 hours. Worn sprocket teeth cause premature track wear and slippage. Inspect sprockets, front and rear idlers, and bottom rollers at every track swap.