Case 440CT Heavy-Duty Rubber Tracks | 320x86x50 & 400x86x50
Heavy-duty replacement rubber tracks for the Case 440CT Compact Track Loader, offered in 320x86x50 and 400x86x50. CASE describes tracked machines around lower ground pressure, stable operation, ground contact, flotation, and traction; track width changes how those advantages are applied to the job.
Choose Track Width for the Work
320x86x50: The narrower footprint concentrates more machine weight over a smaller contact area for higher ground pressure, strong pushing performance on firm ground, tighter access, and typically lower replacement cost.
400x86x50: The wider footprint spreads machine weight across more surface area for lower ground pressure, improved flotation, greater stability, and reduced surface disturbance in mud, sand, soft soil, landscaping, and finish-grade applications.
Choose the Tread for the Work
- C-Block: Broad block contact provides stable all-around traction and predictable steering across dirt, gravel, hardpack, rock, concrete, and general construction.
- Multi-Bar: A high-contact bar layout supports smooth travel, consistent traction, and reduced vibration across dirt, sand, packed ground, wet conditions, and hard flat surfaces.
- Zig-Zag: Stepped, angled lugs create multiple biting edges and open cleanout channels for mud, wet clay, snow, loose soil, and slopes.
- Block: Alternating blocks balance traction, machine stability, and ride quality across mixed dirt, gravel, and hardpack.
Heavy-Duty Track Construction
Advanced abrasion-resistant rubber, a continuous steel-cord core, and drop-forged, heat-treated steel links provide strength under repeated pushing, turning, grading, loading, and travel. Heavy-duty construction uses approximately 30% more rubber than standard-duty replacements through high-wear areas to help resist stretching, cuts, tearing, chunking, and premature abrasion.
Undercarriage & Track Life
Inspect sprockets, rollers, idlers, alignment, and track tension before installation. Worn components, debris packing, or incorrect tension can accelerate wear and reduce service life. Set final track tension to CASE service specifications after installation.
Warranty & Support
Nationwide fulfillment is available, backed by a 24-month warranty against manufacturing defects and application support when needed.
Tested. Trusted. Proven.
Heavy-Duty Comes Standard.
ENGINEERED FOR THE JOBSITE
Built Tough
Heavy-duty replacement rubber tracks engineered for compact track loaders, tracked skid steers, mini excavators, mini track loaders, and demanding construction equipment applications.
-
100% Virgin Rubber
Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.
-
Continuous Steel Cords
Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.
-
Drop-Forged Links
Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.
-
Corrosion Resistant
The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.
-
Reinforced Sidewalls
Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.
-
Low-Vibration Tread
Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.
Frequently Asked Questions
Fitment, availability, fulfillment, and support for this product
What size tracks does the Case 440CT use?
Which tread is best for the Case 440CT?
How much do Case 440CT tracks cost?
How fast can I get tracks for my Case 440CT?
Should I replace the tracks on my Case 440CT?
Do you sell undercarriage parts for the Case 440CT?
Find More Rubber Tracks
Browse by size, tread pattern, or brand