CAT 272C Heavy-Duty Rubber Tracks | 450x86x63
Heavy-duty 450x86x63 replacement rubber tracks for the CAT 272C Compact Track Loader, built for dependable traction, flotation, stability, and productive ground contact across demanding construction and earthmoving conditions. Repeated pushing, grading, loading, turning, and travel place continuous load through the track and undercarriage.
450 mm Footprint & Ground Performance
The 450 mm (18") footprint provides broad ground contact for stable travel and useful flotation on soft or loose surfaces. On hardpack, gravel, clay, dirt, and mixed jobsites, tread geometry becomes the primary application choice for balancing traction, cleanout, ride quality, and wear.
Choose the Tread for the Work
- C-Block: Broad offset blocks provide stable ground contact, dependable all-around traction, and strong wear performance across dirt, gravel, hardpack, rock, concrete, and general construction.
- Multi-Bar: Closely spaced cross-ground bars maintain frequent contact for smooth travel, consistent traction, and reduced vibration across dirt, sand, packed ground, wet conditions, and hard flat surfaces.
- Zig-Zag: Angled, stepped lugs create multiple biting edges while open channels promote cleanout in mud, wet clay, snow, loose soil, and sloped terrain.
- Z-Max: High-bite lug geometry is built for demanding off-road applications where pushing performance and control under load matter most.
Heavy-Duty Track Construction
Advanced abrasion-resistant rubber, a continuous steel-cord core, and drop-forged, heat-treated steel links provide the strength required for repeated drive torque, turning, loading, grading, and travel. The heavy-duty build uses approximately 30% more rubber than standard-duty replacements, adding wear material through high-stress areas while reinforced internal construction helps maintain dependable sprocket engagement and resist stretching, cuts, tearing, chunking, and premature abrasion.
Undercarriage & Track Life
Track life depends on the complete undercarriage. Inspect sprockets, rollers, idlers, alignment, and track tension before installation. Worn mating components, debris packing, or incorrect tension can accelerate wear and reduce service life. Set final track tension to the machine manufacturer's service specification after installation.
Warranty & Support
Nationwide fulfillment is available, backed by a 24-month warranty against manufacturing defects and application support when needed.
Tested. Trusted. Proven.
Heavy-Duty Comes Standard.
ENGINEERED FOR THE JOBSITE
Built Tough
Heavy-duty replacement rubber tracks engineered for compact track loaders, tracked skid steers, mini excavators, mini track loaders, and demanding construction equipment applications.
-
100% Virgin Rubber
Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.
-
Continuous Steel Cords
Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.
-
Drop-Forged Links
Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.
-
Corrosion Resistant
The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.
-
Reinforced Sidewalls
Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.
-
Low-Vibration Tread
Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.
Frequently Asked Questions
Fitment, availability, fulfillment, and support for this product
What size tracks does the CAT 272C use?
Which tread is best for the CAT 272C?
How much do CAT 272C tracks cost?
How fast can I get tracks for my CAT 272C?
Should I replace the tracks on my CAT 272C?
Do you sell undercarriage parts for the CAT 272C?
Find More Rubber Tracks
Browse by size, tread pattern, or brand