Takeuchi TL130 Rubber Tracks & Parts

The Takeuchi TL130 is cataloged in more than one track width — 320 / 400 mm. Pick the width your undercarriage is actually set up for, then choose tread for the ground you work. Free freight to the lower 48 on every track, 24-month warranty.

Which width fits your Takeuchi TL130

  • 400x86Tx52 — 400 mm (16") wide, 86 mm pitch, 52 links, triangle guide lugs
  • 320x86Tx52 — 320 mm (13") wide, 86 mm pitch, 52 links, triangle guide lugs

These are not interchangeable by preference — the width your machine takes is set by the roller frame and sprocket it left the factory with. Wider tread floats better on soft ground and spreads ground pressure; narrower runs cheaper, turns easier and clears tight spots. Measure the existing track across the tread face before you order.

Tread choice for the Takeuchi TL130

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • Staggered Block — mixed dirt and gravel. Block stability with better cleanout than a straight block
  • Multi-Bar — mud, snow and soft ground. Deep bar lugs bite and shed material instead of packing up
  • C-Block — concrete, asphalt and hard-packed ground. Longest wear life and the least vibration on hard surfaces
  • Zig-Zag — general mixed ground. Balanced traction with a smoother ride than a bar tread

If the machine splits its time between surfaces, buy for the ground you are on most — a hard-surface tread on constant mud will spin, and a bar tread on concrete will wear out in half the hours.

Takeuchi TL130 at a glance

  • Operating weight — 7,646 lb
  • Engine — 67 hp

Undercarriage parts for the Takeuchi TL130

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

How these wear

CTLs run high ground speed and counter-rotate all day, which is what eats edge lugs and drive lugs first. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so one of these sizes shows up on machines from several makers. If you run any of these alongside the Takeuchi TL130, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Takeuchi undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts
Takeuchi TL130 compact track loader

Track sizes

Heavy-Duty Rubber Tracks for TL130

  • 400x86Tx52 Heavy Duty Rubber Track | Staggered Block
    Takeuchi TL130 400x86Tx52 Staggered-Block
    • Heavy Duty | 400x86Tx52
    • Smooth Ride
    • Easy Turning
    • Cut Resistant
    $1,189.50$1,143.75

    In stock

    Add to quote
  • 400x86Tx52 Heavy Duty Rubber Track | Multi-Bar
    Takeuchi TL130 400x86Tx52 Multi-Bar
    • Heavy Duty | 400x86Tx52
    • Max Pushing Power
    • Deep Mud Grip
    • Self-Cleaning
    $1,287.00$1,237.50

    In stock

    Add to quote
  • 320x86Tx52 Heavy Duty Rubber Track | Staggered Block
    Takeuchi TL130 320x86Tx52
    • Heavy Duty | 320x86Tx52
    $1,111.50$1,069.00

    In stock

    Add to quote
  • 320x86Tx52 Heavy Duty Rubber Track | C-Block
    Takeuchi TL130 320x86Tx52 C-Block
    • Heavy Duty | 320x86Tx52
    • Maximum Durability
    • Anti-Vibration
    • Cut & Tear Resistant
    $1,059.50$1,018.75

    In stock

    Add to quote
  • 320x86Tx52 Heavy Duty Rubber Track | Multi-Bar
    Takeuchi TL130 320x86Tx52 Multi-Bar
    • Heavy Duty | 320x86Tx52
    • Max Pushing Power
    • Deep Mud Grip
    • Self-Cleaning
    $1,053.00$1,012.50

    In stock

    Add to quote
  • 320x86Tx52 Heavy Duty Rubber Track | Zig-Zag
    Takeuchi TL130 320x86Tx52 Zig-Zag
    • Heavy Duty | 320x86Tx52
    • High Traction
    • Self-Cleaning
    • Versatile Performance
    $1,072.50$1,031.25

    In stock

    Add to quote

Which tread fits Takeuchi TL130?

Pick a tread for your jobsite — then buy above.
+ Recommended surface- Not the primary use— Application dependent
PatternBest UseKey TraitsRoadClayGravelMulchMudTurfAction
Staggered Block Staggered BlockSmooth turning A smoother-riding tread option with easier turning and dependable cut resistance on mixed surfaces.
  • Smooth Ride
  • Easy Turning
  • Cut Resistant
+-+--+View
Multi-Bar Multi-BarPushing power and mud grip Designed for pushing power, deep mud grip, and clean-out performance when traction matters more than smooth finish.
  • Max Pushing Power
  • Deep Mud Grip
  • Self-Cleaning
-+-+++View
C-Block C-BlockHeavy-duty durability Built for maximum durability on abrasive jobsites, hard-pack surfaces, demolition debris, and mixed gravel.
  • Maximum Durability
  • Anti-Vibration
  • Cut & Tear Resistant
+++---View
Zig-Zag Zig-ZagAll-season traction A versatile all-season pattern with high traction, self-cleaning channels, and balanced ride quality.
  • High Traction
  • Self-Cleaning
  • Versatile Performance
++++++View

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

Takeuchi TL130 Rubber Tracks & Parts fitment data

Machine Performance

Operating Weight7646 lb
Horsepower67 HP
ROC / Bucket Force1620 lb

Hydraulics & Lift

Standard Flow18 GPM

Verified-fit rubber tracks and undercarriage parts for the Takeuchi TL130. Confirm size and tread before ordering.

Frequently Asked Questions

What size rubber tracks fit a Takeuchi TL130?
The Takeuchi TL130 can use320 x 86T x 52 or 400 x 86T x 52. rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.