TrackTECH's current governed fitment catalog lists the Takeuchi TL12R2 and TL12V2 with the same merchant-confirmed primary rubber-track size: 450x86B60.
TL12R2 / TL12V2 Track Size
| Model | Primary TrackTECH fitment | Status |
|---|---|---|
| Takeuchi TL12R2 | 450x86B60 | Merchant-confirmed, release-ready |
| Takeuchi TL12V2 | 450x86B60 | Merchant-confirmed, release-ready |
That is a 450mm-wide track with 86mm pitch and 60 links in the governed B-guide family.
About Guide-Type Labels
Do not rely on a generic statement that every Takeuchi CTL uses a T-guide. Supplier catalogs can use different suffix conventions. TrackTECH's current governed identity for these two TL12 models is 450x86B60, so the exact size and guide geometry should be matched to the machine rather than inferred from brand alone.
Tread Pattern for a TL12
Tread choice depends on the work surface, not the horsepower badge. Confirm 450x86B60 first, then choose among the patterns actually offered in that size. See our tread-pattern comparison for a practical application-based guide.
Replacement Checks
- Inspect sprocket teeth for hooking.
- Check rollers and idlers for play, leaks, or binding.
- Set track tension to the machine service specification after installation.
- Replace both sides together when wear is comparable.
Use the Rubber Track Finder or call (850) 816-7898 if you want TrackTECH to confirm the application before ordering.