Bobcat MT52 Rubber Tracks & Parts

Bobcat MT52 tracks and undercarriage, sized 180x72x39 (180 mm wide × 72 mm pitch × 39 links). Made for hardscape, landscape and tight-access work. Free freight, 24-month warranty.

What the numbers mean on a Bobcat MT52

  • 180x72x39 — 180 mm tread width (about 7"), 72 mm pitch, 39 links

Width is the tread face, pitch is the distance between drive lugs, and links is the count around the loop. All three have to match — a track one link off will not tension correctly no matter how close the width is.

Tread choice for the Bobcat MT52

Size gets the track on the machine; tread decides how it works and how long it lasts. What we stock for this one:

  • C-Block — concrete, asphalt and hard-packed ground. Longest wear life and the least vibration on hard surfaces
  • Directional — digging, trenching and slope work. The standard excavator tread

If the machine splits its time between surfaces, buy for the ground you are on most — a hard-surface tread on constant mud will spin, and a bar tread on concrete will wear out in half the hours.

Bobcat MT52 at a glance

  • Operating weight — 2,756 lb
  • Engine — 18 hp

Undercarriage parts for the Bobcat MT52

Rollers, idlers and sprockets wear on the same clock as the track. Fitting new rubber over a hooked sprocket or a seized roller is the fastest way to lose the new track — check these while the tracks are off:

How these wear

Stand-on loaders spend their life on curbs, trailers and hard surfaces, so abrasion is the usual failure mode, not cracking. Replace in pairs where you can: a new track running against a stretched one loads the drive unevenly and you will feel it in the steering.

Same track, other machines

Track size follows undercarriage geometry, not brand, so 180x72x39 shows up on machines from several makers. If you run any of these alongside the Bobcat MT52, it is the same belt:

Not sure which you are running? Read the size off the inside of the old track, or call (850) 816-7898 and we will pull it off the machine record. The Track Finder works by make and model too.

More Bobcat undercarriage

Free US Shipping100% Fit GuaranteePremium OEM Quality

Shop Parts
Bobcat MT52 mini track loader

Track sizes

Heavy-Duty Rubber Tracks for MT52

|
  • 180x72x39 Heavy Duty Rubber Track | C-Block
    Bobcat MT52 180x72x39 C-Block
    • Heavy Duty | 180x72x39
    • Maximum Durability
    • Anti-Vibration
    • Cut & Tear Resistant
    $235.30$226.25

    In stock

    Add to quote
  • 180x72x39 Heavy Duty Rubber Track | Directional
    Bobcat MT52 180x72x39 Directional
    • Heavy Duty | 180x72x39
    $235.30$226.25

    In stock

    Add to quote
  • 180x72x39 Bridgestone Rubber Track | C-Block
    Bobcat MT52 180x72x39 C-Block
    • Bridgestone | 180x72x39
    • Maximum Durability
    • Anti-Vibration
    • Cut & Tear Resistant

    Request quote

    Add to quote

Which tread fits Bobcat MT52?

Pick a tread for your jobsite — then buy above.
+ Recommended surface- Not the primary use— Application dependent
PatternBest UseKey TraitsRoadClayGravelMulchMudTurfAction
C-Block C-BlockHeavy-duty durability Built for maximum durability on abrasive jobsites, hard-pack surfaces, demolition debris, and mixed gravel.
  • Maximum Durability
  • Anti-Vibration
  • Cut & Tear Resistant
+++---View

  • 100% Virgin Rubber

    Engineered to resist chunking, tearing, and cutting in harsh, abrasive environments.

  • Continuous Steel Cords

    Jointless internal cable architecture eliminates structural weak points and maximizes overall tensile strength.

  • Drop-Forged Links

    Precision heat-treated guide lugs ensure exact sprocket engagement and prevent de-tracking under heavy side-loads.

  • Corrosion Resistant

    The internal steel framework is fully encapsulated to prevent oxidation, rust, and moisture penetration.

  • Reinforced Sidewalls

    Extra-thick vulcanized rubber and tapered edge profiles protect against curb slashing and lateral impacts from jobsite debris.

  • Low-Vibration Tread

    Optimized lug spacing and pitch geometry absorb shock, reducing undercarriage wear and minimizing cabin vibration.

Bobcat MT52 Rubber Tracks & Parts fitment data

Machine Performance

Operating Weight2756 lb
Horsepower18 HP

Hydraulics & Lift

Standard Flow6 GPM

Fitment & Part Numbers

Track Size180x72x39
Sprocket7
Idler7
Roller7

Verified-fit rubber tracks and undercarriage parts for the Bobcat MT52. Confirm size and tread before ordering.

Frequently Asked Questions

What size rubber tracks fit a Bobcat MT52?
The Bobcat MT52 can use 180 x 72 x 39 rubber tracks. Match the full size on the track you are replacing before you order. If your machine has more than one track setup, choose the width and guide style that matches the track currently on the machine.